|
Coalesced Bainite HKDH Bhadeshia, E Keehan, L Karlsson and H-O Andrén Trans. Indian Inst. Metals, accepted for publication Publications
2006
Austenitic stainless steels The evolution of primary and secondary niobium carbonitrides in AISI 347 stainless steel during manufacturing and long-tern ageing J Erneman, M Schwind, H-O Andrén, J-O Nilsson, A Wilson and J Ågren Acta Mater. 54 (2006) 67-76 Ferritic steels Atom probe field ion microscope measurements of carbon segregation at an α: α grain boundary and service failures by intergranular stress corrosion cracking A Atrens, JQ Wang, K Stiller and HO Andren Corrosion Science 48 (2006) 79-92 9-12% chromium steels An EFTEM study on Z-phase nucleation in martensitic chromium steels A Golpayegani and H-O Andrén In “Materials for Advanced Power Engineering 2006”, Eds. J Lecomte- Beckers, M Carton, F Schubert and PJ Ennis. Schriften der Forschungs- zentrum Jülich GmbH (2006), Reihe Energitechnik, Band 53 Part III pp 1267-1274 Cemented carbides and cermets Mechanisms of plastic deformation of WC-Co and Ti(C,N)-WC-Co G Östberg, K Buss, M Christensen, S Norgren, H-O Andrén, D Mari, G Wahnström and I Reineck Int. J. Refr. Met. & Hard Mater. 24 (2006) 135-144. Effect of TaC on plastic deformation of WC-Co and Ti(C, N)-WC-Co G Östberg, K Buss, M Christensen, S Norgren, H-O Andrén, D Mari, G Wahnström and I Reineck Int. J. Refr. Met. & Hard Mater. 24 (2006) 145-154 Effect of Σ2 grain boundaries on plastic deformation of WC-Co cemented carbides G. Östberg, M. U. Farooq, M. Christensen , H.-O. Andrén, U. Klement and G. Wahnström Mater. Sci. Eng. A416 (2006) 119-125 On spinodal decomposition in the Co-W system G Östberg, Bo Jansson and H-O Andrén Scripta Mater. 54 (2006) 595-598 Microstructural changes during wear by plastic deformation of cemented carbide and cermet cutting inserts G Östberg and H-O Andrén Metall. Mater. Trans. 37A (2006) 1495-1506 Steel weld metal Influence of carbon, manganese and nickel contents on microstructrue and properties of strong steel weld metals. Part 1 - Effect of nickel content E Keehan, L Karlsson and H-O Andrén Sci. Techn. Welding & Joining 11 (2006) 1-8 Influence of carbon, manganese and nickel contents on microstructrue and properties of strong steel weld metals. Part 2 - Impact toughness gain from manganese reductions E Keehan, L Karlsson, H-O Andrén and H K D H Bhadeshia Sci. Techn. Welding & Joining 11 (2006) 9-18 Influence of carbon, manganese and nickel contents on microstructrue and properties of strong steel weld metals. Part 3 - Increased strength from carbon additions E Keehan, L Karlsson, H-O Andrén and H K D H Bhadeshia Sci. Techn. Welding & Joining 11 (2006) 19-24 New developments with C-Mn-Ni high strength steel weld metals, Part A — Microstructure E Keehan, L Karlsson, H-O Andrén and H K D H Bhadeshia Welding Journal 85(9) (2006) 200s-210s New developments with C-Mn-Ni high strength steel weld metals — Part B, Mechanical properties E Keehan, L Karlsson, H-O Andrén and L-E Svensson Welding Journal 85(10) (2006) 218s-224s Austenitic stainless steels Comparison between quantitative metallography and modelling of sigma-phase particle growth in AISI 347 stainless steel J Erneman, M Schwind, L Nylöf, J-O Nilsson, H-O Andrén and J Ågren Metall. Mater. Trans. A, 36 (2005) 2595-2600 9-12% chromium steels Mechanism for beneficial effect of boron addition on creep resistance of 9-12% chromium steels A Golpayegani and H-O Andrén In "Solid-to-Solid Phase Transformations in Inorganic Materials 2005", Eds. JM Howe, LE Laughlin, JK Lee, U Dahmen and WK Soffa, TMS, Warrendale PA (2005) Vol. 1 pp. 461-466 Cemented carbides and cermets Microstructural changes during wear by plastic deformation of cemented carbide and cermet cutting inserts G Östberg, H-O Andrén and S Norgren Proc. 16th Plansee Seminar, Ed. G Kneringer, P Rödhammer and H Wildner, Plansee Holding AG, Reutte, Tyrol, Austria, 2005, Vol. 2 pp. 1141–1157 Steel weld metal Understanding mechanical properties of novel high strength weld metals through high-resolution microstructural investigations E Keehan, L Karlsson, H-O Andrén and HKDH Bhadeshia Trends in Welding Research 2005, Proc. 7th Int. Conf., ASM International, Materials Park, OH Publications
2004
Instruments and
methods Precipitation reactions caused by nitrogen uptake during service at high temperatures of a niobium stabilised austenitic stainless steel J Erneman, M Schwind, P Liu, J-O Nilsson, H-O Andrén and J Ågren Acta Materialia 52 (2004) 4337-4350 Martensitic steels Conventional and tomographic atom probe investigations of secondary- hardening carbides H Leitner, K Stiller, H-O Andrén and F Danoix Surf. Interface Anal. 36 (2004) 540-545 Steel weld metal Development of high strength steel weld metals—potential of novel high-Ni compositions L Karlsson, E Keehan, H-O Andrén and H K D H Bhadeshia Proc. Eurojoin 5, Vienna (2004) High strength steel weld metals—potential of novel high-nickel composition L Karlsson, E Keehan, H-O Andrén and D Widgery 12th Int Symp. “Metallography 2004”, Slovakia (2004)
Publications 2003 Instruments and
methods 9-12% chromium steels
Cemented carbides and
cermets Steel weld metal
Publications 2002 Instruments and
methods Cemented carbides and
cermets Effect of grain boundary geometry on plastic deformation in
WC-Co Steel weld metal
Publications 2001 Instruments and
methods 9-12% chromium steels
Influence of strain on precipitation reactions during creep of
an advanced
9% chromium steel Quantitative evaluation of particle size distributions of
different
phases in steel P92 exposed at 600°C and 650°C using EFTEM Microstructural development during ageing of an 11% chromium
steel alloyed
with copper Cemented carbides and
cermets Microstructure of the Ni binder phase in a TiC-Mo2C-Ni
cermet
material Development of cermet microstructures during sintering Microstructure development during sintering and heat-treatment
of cemented
carbides and cermets Development of microstructure during gradient sintering of a
cemented
carbide Effect of pre-alloyed raw materials on the microstructure of a
(Ti,W)(C,N)-Co
cermet Effect of cubic phase composition on gradient zone formation
in cemented
carbides The effect of binder volume fraction on gradient sintering of
cemented
carbides Steel weld metal
Publications 2000 Review Austenitic stainless
steels Development of precipitate size and volume fraction of niobium
carbonitrides
in stabilised stainless steel 9-12% chromium steels
Cemented carbides and
cermets Gradient zones in WC-Ti(C, N)-Co based cemented carbides:
experimental
study and computer simulations Publications 1999 Austenitic stainless
steels 9-12% chromium steels
Boron distribution in 9-12% chromium steels Cemented carbides and
cermets Methods for atom probe study of near surface zones in cemented
carbides Microstructure of model cermets with high Mo or W content Effect of carbon content on the microstructure and mechanical
properties
of (Ti, W, Ta, Mo)(C, N)-(Co, Ni) cermets updated
November 30, 2006
andren@chalmers.se |